Douglas Partners have been providing innovative geophysical solutions to our clients for more than 30 years, often where conventional intrusive methods are impractical or costly.

Our team of highly experienced Geophysicists specialise in the application of a broad range of techniques for geotechnical, environmental and groundwater investigations.

Geophysics may be used during investigation, construction and remedial phases of projects. Projects can vary from general site assessment, where bulk information of the site subsurface permits cost effective selection of targets for further investigation, to measurement of a particular site characteristic.

Add-Ons

01

Fast turnaround and accurate test results

02

Reliable service and easy to work with

03

Conduct our business with integrity

04

Full geotechnical and groundwater engineering support

05

Tender preparation service

Seismic

Douglas Partners has been conducting seismic surveys across Australia and abroad for over 30 years.

Seismic Refraction

Seismic refraction is commonly used in to characterise rock strength, depth and thicknesses of layers for excavation planning.

Example:

Seismic Refraction Profiling along a proposed section of highway. Seismic velocities from the profile were used to estimate excavatability.

Multichannel Analysis of Surface Waves (MASW)

MASW is commonly used in Geotechnical investigations to locate zones of low soil compaction, mapping depth to bedrock, estimating shear moduli and site classification.

Example:

MASW profiling for site classification based on shear wave velocity.

Vibration Monitoring

Douglas Partners have provided vibration monitoring services and management strategies for our clients developed and refined for over 25 years.
Vibration monitoring taking place in Sydney CBD by our expert Geophysics Consultants.

Vibration Monitoring is often required on building and infrastructure projects of all sizes, usually where rock excavation, piling or vibratory compaction is planned near potentially affected buildings or infrastructure.

Vibration Monitoring is often a condition of DA approvals and/or required by owners of underground assets such as services, rail tunnels and other infrastructure. With the increasing tendency towards litigation many clients use our monitoring services to help safeguard against possible claims made by neighbours and asset owners relating to vibration damage.

At Douglas Partners, vibration monitoring is undertaken by experienced Geophysicists and Geotechnical engineers using regularly calibrated equipment, giving all stakeholders confidence in the accuracy of recorded vibration levels and the integrity of our reporting and advice.

Electrical Resistivity Imaging & Sounding

Resistivity Imaging can provide cost effective, high resolution subsurface imaging, where sufficient contrast exists between the electrical properties of subsurface materials.

This technique has been successfully applied by Douglas Partners in a wide variety of environments.  Typical applications include:

  • Layer mapping
  • Depth to bedrock
  • Landfill Investigations
  • Void mapping
  • Groundwater and contamination investigations

Example 1:

Mapping the continuity and thickness of a clay layer along a proposed highway route was considered necessary to help assess the likelihood of future subsidence.  The models showed a strong correlation with nearby boreholes. 

Example 2:

Mapping a landfill pit boundary was required for a proposed development. Resistivity contrasts between the landfill material and the underlying geology made delineation of the landfill boundary and thickness possible.

Vertical Electrical Soundings

Vertical Electrical Soundings provide a 1D electrical profile of the subsurface, commonly used in earthing design for  lightning protection, electrical substations, power lines and pipelines.

Ground Penetrating Radar

Ground Penetrating Radar (GPR) has gained widespread acceptance across a number of industries, in part due to the broad uptake by service locators and concrete scanners. However, implementation of GPR for more complex and detailed investigations requires specialist geophysical expertise.

A good understanding of how soil conditions, survey design and data processing affect survey outcomes is vital for its successful implementation. Douglas Partners’ Geophysicists have successfully implemented 2D and 3D GPR for a wide variety of applications, 

such as:

  • Void mapping
  • Pavement thickness assessment
  • Depth to bedrock
  • Coastal geology investigations
  • Groundwater
  • Structural engineering investigations
  • Grave-site detection and mapping
  • Archaeology

Ground Conductivity Mapping

Ground Conductivity Mapping is one of the most cost effective Geophysical methods available.

Rapid acquisition is made possible using custom vehicle setups (using a 4WD or ATV).  Ground conductivity and position data are logged continuously in real-time whilst driving, making it possible to cover many hectares in one day.  

Applications for conductivity mapping include:

  • Salinity Mapping
  • Soil thickness and depth to bedrock
  • Landfill mapping
  • Contamination plume mapping
  • Soil mapping
Ground Conductivity Mapping

Other Geophysical Methods

Douglas Partners employs a variety of geophysical methods to investigate the subsurface.

Marine Geophysics – seismic reflection and refraction, sonar, magnetic
Other geophysical methods employed by Douglas Partners include:
  • Marine Geophysics – seismic reflection and refraction, sonar, magnetics
  • Multi-channel analysis of surface waves
  • Downhole p- and s- wave and CPT seismic profiling
  • Cross-hole 2D seismic imaging
  • Geophysical borehole logging
  • Electromagnetics and Induced Polarisation
  • Gravity and Magnetic